How to maintain a smart toilet? How to clean a smart toilet?
As the craze for smart toilets continues to heat up, more and more smart toilets are entering the homes of ordinary people. In addition to buying and buying, how to extend the life of the product is the key!
Smart toilets are not only expensive, but also have their own special ways to maintain them. Here, our thoughtful editor has compiled some tips for maintaining and cleaning smart toilets. Let’s take a quick look~
1. Smart toilet maintenance
1. Please do not knock or step on sanitary ware;
2. Do not close the toilet lid too quickly;
3. Please wipe the sanitary ware gently with clean water. Do not use abrasive or strong (acidic) cleaning agents, solvents, etc. to clean the toilet and water tank accessories to avoid damage to the product surface and accessories;
4. Do not close the toilet immediately after pouring detergent into it. Rinse it with water and then close it.
5. Do not use high-temperature water to wash sanitary ware;
6. Avoid flushing the electronic eye of the smart toilet with water to prevent possible wetness of the sensor circuit board or electrical short circuit;
7. During the use of the product, if there is a situation that cannot be handled according to the instructions for use, you should contact the local agent or manufacturer in time for professional repairs. Do not make your own claims and cause accidental damage.
2. Smart toilet cleaning
1. Upper machine and lower body: The upper machine and lower body can be disassembled for cleaning. As long as the upper machine is gently lifted, it can be easily removed and separated from the water source and power supply.
2. Body: After separating the seat ring and seat cover in the correct way, the contaminated parts can be thoroughly cleaned.
When cleaning, just wipe it with a soft rag that has been wrung out of the water. Do not wipe it with detergent or medicine to avoid damaging the components. After cleaning, reinstall.
3. Filter: When dirt blocks the water inlet filter, it may cause insufficient flushing water pressure, so it must be cleaned regularly.
Cleaning steps: Close the water inlet valve; use special tools to unscrew the water filter; use a toothbrush or small brush to clean away dirt.
4. Nozzle: Press the "Nozzle Cleaning" button, water will overflow around the nozzle for cleaning; Pull out the nozzle by hand and hold it tightly to clean the nozzle and pipe head; Use a soft cloth dipped in water to clean; Finally press the stop button to stop spraying water.
5. Deodorizing system: Clean the deodorizing box and the deodorizing suction port. If the odor is still produced, please replace the deodorant; if there is dust or other attachments on the deodorizing box and the deodorizing suction port, the inhaled The air volume will be reduced, and you can use a toothbrush or small brush to clean the dust.
Written at the end: In winter, to prevent damage to the smart toilet due to freezing, please drain the remaining water when not in use.