The frequently used functions of smart toilets are cleaning, seat heating and automatic flushing. The default function of smart toilets is deodorization. The less commonly used functions are generally drying. Some high-configuration toilets have automatic lids and automatic turning circles. The most likely problem when using the above functions is that the cleaning nozzle will drip continuously.
This situation is usually caused by impurities entering the water inlet valve inside the toilet seat, causing the diaphragm of the water inlet valve to not completely close, so water will continue to enter, and the incoming water will flow out from the nozzle. The solution is to replace the water inlet valve. The way to avoid it is to install an angle valve with filtering properties at the water connection pipe of the toilet seat to filter sediment. Cleaning the filter regularly will protect the toilet seat very well. role. The reason why impurities enter the water inlet valve is that there are neighbors upstairs and downstairs who are renovating, and there is easy to be sediment in the pipes, or if the water is stopped and then the water is turned on, sediment is easily washed in.