With the advancement of life and the development of science and technology, smart sanitary ware and other equipment have gradually entered everyone's lives. However, there are still many people who are unwilling to buy smart toilets. They find installation and maintenance troublesome, and they are also worried that the performance will be unstable.
In fact, you don’t need to worry, because many common problems can be easily solved by ourselves.
However, any product will be damaged, and smart toilets are no exception. After long-term use, some malfunctions will inevitably occur. In fact, what I want to say is that these malfunctions are not serious enough to harm the performance of the product.
1. Blockage:
A clogged toilet is what everyone fears most in life. So how to deal with this frequent failure?
The main causes of clogged toilets are mostly caused by insufficient flushing, foreign objects falling in, or aging. If it is clogged by soft objects, it can usually be solved by using simple unclogging tools. If it is clogged by hard objects, you need to dismantle the toilet to unclog it.
2. Water leakage:
Leaking water is the second most troublesome toilet failure. On the one hand, water leakage is often accompanied by noisy sounds, and on the other hand, it wastes water resources.
In fact, the main reason for toilet leakage is that the toilet water tank accessories are aging or damaged. Generally, it is enough to adjust the float in the toilet water tank or replace the drain sealing cover.
3. Installation:
When installing a toilet, the biggest fear is the odor. In fact, this problem can be solved during installation.
Just use glass glue or cement to seal the gaps between the bottom of the toilet, the wall and the ground. Remember not to seal the screw holes in the bottom of the toilet.
4. Button failure:
Relatively speaking, this problem is not that serious. Due to the functional design of the smart toilet, there will be a lot of buttons on the surface. The most common one is a double button. If the button fails, it can be replaced directly. It will not affect the major functions. .
5. The water is not hot:
We know that smart toilets have smart nozzles, and the water in the nozzles can be heated independently. If the water temperature is not hot, you can check the remote control, water tank heating pipe, water temperature sensor, thermal fuse and computer board.
First, check whether the temperature setting of the remote control is normal temperature? Sit and wait for 10 minutes. If there is no heat, please unplug and measure the resistance at both ends of the water tank heating wire. The resistance is about 92 ohms. Then check whether there is a resistance of about 92 ohms at both ends of the heating pipe. If not, the fuse is broken. Measure the temperature. The resistance values at both ends of the sensor (25K ~ 80K) are normal. If they are normal, the computer board is broken. For example, if the water tank is replaced, check whether it is normal after replacement. If the water keeps heating, the computer board is broken and must be replaced together.
6. The seat temperature is not heated:
In winter, what everyone fears most is having their hot butt against a cold toilet. If the seat temperature is no longer hot, you only need to check the remote control, seat heating wire, temperature sensor, computer board and plug-in program.
Solution: Use the remote control to set the heating status (sit and wait for 10 minutes). If there is no heating, please unplug the seat heating wire and measure the resistance at both ends to be about 960+/-50 ohms. If there is no open circuit of the heating wire, Measure the resistance at both ends of the temperature sensor (5K ~ 15K) and it is normal. Is the connection with the plug-in program good? If it is normal, the computer board is broken. If the seat is replaced, check whether it is normal after replacement. If the seat keeps heating, the computer board is broken and must be replaced at the same time.
7. The wind temperature is not hot:
The biggest advantage of the smart toilet is that after getting on the toilet, in addition to having an automatic nozzle to find the "target", the biggest feature is that it also comes with a drying device. So if the air temperature is not hot, it is best to check the drying device and computer board.
Solution: Measure whether there is 89+/-4 ohm resistance at both ends of the drying electric heating wire frame. If there is no resistance, the drying device is broken. If there is, confirm that it is seated correctly and press the dry button to measure whether there is 220V at both ends of the heating wire frame socket. Voltage. If there is no voltage, the computer board is broken. If the drying device is replaced, the computer board should be carefully inspected. Note: If there is a short circuit between the motor slots, sometimes the heating wire frame will open due to the increase in load and the rotation speed slows down, which will also cause the computer board D882 to burn. In that case, please replace the computer board and drying device at the same time.
The above common problems may be solved with a few hands, but when there are major problems with the toilet, the editor still recommends that you seek professional help!